Half-Moon Pendant | Design Mom

By Gabrielle. Photos by Amy Christie for Design Mom.

I’m so excited to share this project with you. Amy Christie and I have been talking about it for months! We saw this gorgeous half-moon pendant necklace by Winifred Grace and we both went all heart-eyes for it. Alas, it’s no longer for sale, but Amy reached out to Winifred and asked permission to try and recreate something similar in a DIY post, and Winifred said yes! Which means, lucky us! We can all learn to make one. We can make one to bling up our own holiday wardrobe, or we can make a bunch and gift them to all of our favorite people.

half-moon-pendant 14

Here’s what Amy says about the project:

With an eight-month old on my hip, I rarely wear jewelry in my everyday life, aside from simple studs in my ears. It can get in the way so it’s easier to go without. However, the holidays inspire me to elevate my attire, step up my getup. From family dinners to holiday parties, I dig out my trinkets and add a sparkle and shine to my outfits.

The half-moon pendant is right up my alley. It’s simple and clean and goes with just about everything. I do not have the skills or materials for metal work but I can create a half-moon pendant necklace with polymer clay and gold leaf. And you totally can, too.

half-moon-pendant 13

Polymer clay is the chameleon of materials; it can be made to look like so many substances. For this piece, the gold leaf does the work, giving the half-moon a metal-like appearance. Add a couple of jump rings and a length of leather cord and this inspired necklace is ready to wear in no time.

If you’ve ever wanted to make your own jewelry with polymer clay, this is the tutorial for you. It’s super easy and in no time, you will be all shiny for the holidays.

half-moon-pendant 15

Let’s get to it!

Make Your Own Half-Moon Pendant Necklace | Design Mom

Supplies:

– polymer clay*
– pasta machine or rolling pin
– circle cutter**
– leather cord
– gold leaf
– 4 jump rings, just large enough to allow the leather cord to go through
– cutting blade
– optional – sealant to protect the gold leaf from wear***

*I used gold polymer clay but use what you prefer. Just remember the color will be visible through the gold leaf crackles.
**The cutter I used was about 1.5″ in diameter.
***This article articulates the sealant options for polymer clay depending on the finish

Half-Moon Pendant Necklace | Design Mom

First, roll out the polymer clay. If you’re using a pasta machine, roll it on the largest setting. Then cut a circle from the rolled clay.

Half-Moon Pendant Necklace | Design Mom

Cut the circle in half. Or, if you want to make a half-moon pendant that is a hair bigger than a half, cut two circles and trim them down as you desire, making sure they are the same.

Half-Moon Pendant Necklace | Design Mom

Make two 2-ring links with the jump rings. On one of the half-moons, press one ring from each jump ring link into the clay, as seen above.

Half-Moon Pendant Necklace | Design Mom

Position the second half-moon on top of the first half-moon, sandwiching the jump rings. Gently press the two pieces together, making sure they are aligned perfectly and there are no air bubbles. Use your thumb to smooth the seam between the two pieces.

Half-Moon Pendant Necklace | Design Mom

Lay the paper-backed gold leaf on the polymer clay and firmly burnish it until the gold leaf adheres to the polymer clay. Cover it completely or leave gaps for a patina look. I only added gold leaf on one side and edges of the half-moon because I like having a “front”.

Bake as directed by the clay manufacturer.

Half-Moon Pendant Necklace | Design Mom

Once baked, seal the pendant to protect the gold leaf (this article describes the options). Next, thread a length of leather cord through one of the jump rings. Tie the cord on the jump ring.

Half-Moon Pendant Necklace | Design Mom

Thread the leather cord through the other ring, pull it taut between the rings, and tie it over the second ring as well.

Half-Moon Pendant Necklace | Design Mom

You can trim the cord to your desired length or leave it long. You can add a clasp or leave the ends clasp-free. I think the necklace works both long and short so I left off a clasp and plan to tie it to the length I want, depending on the outfit.

half-moon-pendant 12

Then get dressed up and enjoy your celebrations!

——-

Thank you, Amy! That looks totally doable. I’m thinking my teens would love making this as well. Three cheers for the chameleon, polymer clay!

What do you think, Dear Readers? Is this a project you could tackle? And do you like the look of the necklace? If you make one, let us know! We want to see photos.